Dynamix DW 2 FXO Bedienungsanleitung PDF herunterladen (Seite 40)

FIRMWARE VERSION 1.0.10.9 GXW40XX USER MANUAL Page 40 of

Disable Direct IP Call

Disables the Direct IP Call function. Default is “No”. If set to “Yes” direct IP-to-IP

calling will not be supported.

Lifeline Mode

Life line feature ensures user can place/receive a PSTN call in an emergency

situation.

1. If set to “Auto”, in case of power loss or loss of SIP registration, the PSTN

line will be seamlessly connected to analog phone connected to FXS port.

2. If set to “Always Connected” the PSTN line will be always connected to

the phone connected to FXS port. VoIP calls will not be allowed in this

configuration.

3. If set to “Always Disconnected”, user can only place VoIP calls, regardless

of any power loss and/or SIP registration problems. User will be unable to

place/receive any PSTN calls.

Failover to FXO Gateway

This feature allows users to place an outbound PSTN call in case there is a loss of

an active registration (SIP server unreachable) of all FXS profiles. If set to “YES”,

when GXW40XX recognizes a loss of registration, all outgoing calls will be routed to

an FXO gateway.

The use of this option presumes a configured GXW410x or another FXO gateway

with an active PSTN line connection.

FXO Gateway

IP Address or URI of the FXO gateway.

NTP server

URI or IP address of the NTP (Network Time Protocol) server. Used by the phone to

synchronize the date and time. An extensive list of public NTP servers can be found

at http://www.ntp.org

NTP Update Interval

Default is 1440. Updates the Network Time Protocol (Values range from 5 – 1440

minutes)

Syslog Server

The IP address or URL of System log server. The server collects system log

information from the device.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 59 60

Keine Kommentare

Dynamix DW 2 FXO Bedienungsanleitung Seite 40