Dynamix DW 2 FXO Bedienungsanleitung PDF herunterladen (Seite 181)

4.2.4 [reboot]

After commit command, type reboot to reload FXO GateWay in new

configuration. The procedure is as below:

usr/config$ reboot

Attached TCP/IP interface to cpm unit 0

Attaching interface lo0...done

AC4804[0] is OK

AC4804[1] is OK

AC4804[2] is OK

Successful

Initialize OSS libraries...OK!

open stack successful

cmInitialize succeed!

GK mode selected.

4.2.5 [flash]

This command will clean the configuration stored in the flash rom and

reboot FXO GateWay in factory default setting.

Parameter Usage:

-clean clean all the user-defined value, and reboot FXO GateWay in

factory default mode.

Note: It is recommended that use “flash –clean” after application firmware

id upgraded.

Warning: Once users execute flash –clean, all the configurations of FXO

GateWay will be cleaned. This can only be executed by user who log in with

root

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 216 217

Keine Kommentare

Dynamix DW 2 FXO Bedienungsanleitung Seite 181