Dynamix UM-SB Bedienungsanleitung PDF herunterladen (Seite 105)

Dynamix UM-SB Series User Manual V0.06

104

The STP state per LANs and WANs are as following:

Blocking - A port that would cause a switching loop, no user data is sent or received but it may go

into forwarding mode if the other links in use were to fail and the spanning tree algorithm

determines the port may transition to the forwarding state. BPDU data is still received in blocking

state.

Listening - The switch processes BPDUs and awaits possible new information that would cause it

to return to the blocking state.

Learning - While the port does not yet forward frames (packets) it does learn source addresses

from frames received and adds them to the filtering database (switching database)

Forwarding - A port receiving and sending data, normal operation. STP still monitors incoming

BPDUs that would indicate it should return to the blocking state to prevent a loop.

Disabled - Not strictly part of STP, a network administrator can manually disable a port.

Move cursor “ >> “ to Clear and press enter.

You can clear all statistics by this command.

-----------------------------------------------------------------------------

Command: status clear <CR>

Message: Clear OK!

-----------------------------------------------------------------------------

You can view the system information, configuration, and configuration in command script by show

command.

Move cursor “ >> “ to show and press enter.

system

Show general information

config

Show all configuration

script

Show all configuration in command script

Command Description

system

The general information of the system will show in system command.

config

Config command can display detail configuration information.

script

Configuration information will prompt in command script.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 142 143

Keine Kommentare

Dynamix UM-SB Bedienungsanleitung Seite 105