Dynamix DW - 04/S Spezifikationen PDF herunterladen (Seite 16)

Speciﬁcations are subject to change without notice.

www.techni-lux.com

Micro LED

Digital Moving Light

DARkBOx DMx MicRO - 12V

CT-DKDBDMXM

The DarkBox DMX Micro is an ultra compact and scalable single output DMX controlled LED dimmer. The DMX Micro also

has a variety of built-in patterns (blink, strobe, candle ﬂicker, power surge ﬂicker, and pulse) for special effects lighting

without the need to program complicated DMX signals. This device occupies 3 DMX channels, which controls brightness,

speed, and mode.

The DarkBox DMX Micro comes factory defaulted to DMX address 1. Due to the compactness of the device, an external

DarkBox Programmer is required for address selection beyond the default. When the device powers up, a sequence of

pulses on the 100s, 10s, and 1s LEDs will indicate the programmed DMX address. For example, an address of 512 will

pulse the 100s LED 5 times, 10s LED 1 time, and 1s LED twice.

Power and signal are delivered using standard 2.1 mm DC jacks and 3.5 mm mini-jacks, respectively. Multiple devices can

be chained together for unlimited expandability to match the user's needs.

DMX signal via mini-jack: Darklight DMX controlled products use 3.5mm mini-jacks (stereo audio tip-ring-sleeve jacks/plugs) due to the compactness

of their size. While standard DMX applications call for XLR plugs, we design our devices using mini-jacks to allow for miniaturization. Users have the

choice of splicing the signal cable to convert from XLR to mini-jack or simply use off the shelf male to male stereo audio extension cables to carry sig-

nal. Experiementally, we've tested over 50 of our DMX devices daisy chained together over 300 meters without signal degradation using audio cable.

Speciﬁcations: Makes any dimmable 12V LED ﬂicker, strobe, blink, surge, pulsate, or dim n Highly scalable by daisy chaining multiple ﬁxtures n LED

indicator displaying output mode even without external lights attached n algorithm never repeats for unique ﬂicker patterns n Drives up to 8 PZ or PA,

50 PY, or 20 PX lights n Input voltage: ±12V DC n Output signal: 12V PWM n Max output current: 1000mA n DC jack size: Standard 2.1/5.5 mm n

Signal jack size 3.5 mm mini-jack n Size: 1.5" x 1.5" x 0.75"

DARkBOx PROgRAMMER DMx - 12V

CT-DKDBPROG

The DMX Programmer is a tool used to adjust the DMX address of Precision DMX lights. Extremely simple to use: plug in

Precision DMX on one end and power on the other end, adjust the controls to the desired address and push "X" to write the

new address into the Precision DMX's memory. Unplug the module and link the Precision DMX back onto the DMX512 system

and you're good to go!

The DMX Programmer also features built-in a 224 channel DMX controller for use with static effects. A great tool to have for

signal and ﬁxture veriﬁcation. This tool is also electrically protected from DMX line short circuits.

Speciﬁcations: Hand held DMX address selector for Precision DMX lights n 224 channel DMX controller n Over 15 sample chase patterns compatible

up to 32 individually addressed DMX ﬁxtures n Testing and ﬁxture veriﬁcation modes n 3 digit LED display n Dual polarity input n 4 buttons for intuitive

operation n Input voltage ±12V DC n Max output current 1000mA n DC jack size Standard 2.1/5.5 mm n Size: 2.8" x 2.1" x 0.7"

DARkBOx FlickER - 12V

CT-DKDBFLICK

The DarkBox Flicker is an easy to use yet powerful special effects pattern generator and dimmer for LEDs. Single but-

ton operation allows the user to select different output patterns such as candle ﬂicker, power surge ﬂicker, blink, strobe,

and brightness. Clicking the button cycles through the various modes while holding the button chooses the brightness

of each mode. Over 15 mode and speed combinations to choose from.

Speciﬁcations: Makes any dimmable 12V LED ﬂicker, strobe, blink, surge, pulsate, or dim (3 speeds for each pattern)

n Single click of a button to change patterns. n Flicker module remembers its set pattern even when power is cut off n LED indicator displaying output

mode even without external lights attached n Never repeating algorithm for unique ﬂicker patterns n Drives up to 8 PZ, 8 PA, 50 PY, or 20 PX lights

n Input voltage: ±12V DC n Output signal: 12V PWM n Max output current: 1000mA n DC jack size Standard 2.1/5.5 mm n Size: 1.9" x 1.1" x 0.7"

VEctORlED 712QB

DM-VECTORLED712QB

Extremely small, fast and powerful led moving beam with low power consumption

Specications: Light source: 7 x 12W (Quad 4 in 1 RGBW) LEDS n Output: 7100 lux at 3 meters n Long life LED

light source n Individual LED control n Pan/Tilt movement range: 540/ 270 degrees n Beam Angle: 8 degrees n

Operation modes: run standalone master/slave, DMX, or sound active n Digital shutter quick strobing effects and

blackouts n Smooth electronic dimming: 0-100% n Electronic strobe with pulse and random effects n Special

optical combining lenses for smooth and even color mixing n DMX Channels: 6, 13, or 37 channels n DMX Con-

nectors: 3 pin XLR n 4 button LCD display menu system for addressing and ﬁxture settings n Approvals: CE n

Power in: IEC connector n Insulation Rating: IP20 n Fuse: 5A (Mini 5 x 20MM) n Power consumption: 150W n

Power: 110-240vAC 50/60HZ n Size: 11.97" x 10.5" x 6" n Weight: 6 kgs / 13.20 lbs n Color: Black

(Formally Darklight)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Dynamix DW - 04/S Spezifikationen Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Dynamix DW - 04/S