Dynamix DW - 04/S Spezifikationen PDF herunterladen (Seite 7)

Speciﬁcations are subject to change without notice.

www.techni-lux.com

LED Digital Lighting

DMx lED RiBBON

DL-DMXRIBBON/C

DMX Ribbon is a ﬂexible RGB tricolor ﬂat LED strip. It operates on stan-

dard DMX input and 12vDC power. No special drivers needed. It is fully

sealed for IP65 use. Every two LEDs are operated as 3 DMX channels.

Requires DMX Address Writer box to change start address. Sold in 2.5

meter reels.

Speciﬁcations: Light source: SMD 5050 RGB LEDs n Number of LEDs

per meter: 32 n Number of pixels/sections of control per meter: 16 n 1.25

inch spacing between LEDs n 2.5 Meter reels per DMX universe: 4 n Can

be shortened to 10 inch increments n No ﬂicker, constant current driven

LEDs n RGB color mixing with independent control of each pixel (set of

2 LEDs) n Beam angle: 120 degrees n DMX Channels: 48 per meter, or

120 per 2.5 meter reel n Control: DMX 512 n DMX In/Out: using special

cables/connectors sold separately n Manually addressable using DMX

Writer 1 n Insulation Rating: IP65 n Power input: 12vDC n Power con-

sumption: 12W per meter, or 30W per 2.5 meter roll n Size: 99" length x

0.5625" wide x 0.1875" thick n Weight: 0.25 kgs / 0.55 lbs n Color: Clear

/ Black PCB

Optional Accessory:

AC-DMXW1

(See DL-DMXWAND Double-sided DMX

LED Want Tubes Accessories for more in-

formation.)

Optional Accessories:

(See DL-DMXWAND Double-sided DMX LED Want Tubes Accessories

for more information.)

DA-4PE1 4-Pin Male to Female Extension cable

DA-4PE5 4-Pin Male to Female Extension cable

DA-4PPT T with 2-Pin power in and 4 Pin in and out

for inline boost

DA-4PDPI/S Speciﬁcations: 4-Pin female to DMX

Data 3-Pin Male XLR and 2-Pin Power In n Includes

an End of line Terminator n Cable length: 12" wide x

6.5" high n Weight: 0.19 lbs n Color: Black

DA-4PT 2-Pin Power in tail 10" used for DMX Wand. Pro-

vides power in connector with 10" tail to connect 12vDC.

DA-4PPI 2-Pin Power in tail 10" used for DMX Wand. Provides

power in connector with 10" tail to connect 12vDC.

Customizable

Distance between

spheres

minimum 15 cm

maximum 1 meter

Cable color Black or White

Cable gland Black or Light gray

Number of spheres on

one strand

170 maximum

(Limited by DMX and power supply)

Voltage drop After 50 Spheres

DMx SPhERE

DL-DMXSPHERE

AC-DMXW2 Speciﬁcations: Used to set start

DMX addresses n 7-24vDC input connection

block, terminal block connections output n Size:

5.5" x 3" x 1" n Weight: 0.44 lbs n Color: Black

DMX Spheres can be seen from all sides. Each sphere string can be

hung and be connected from one to the other using special 4-pin cables.

Applications include decorations for retail shops, shopping centers, night

clubs, hotel lobbies, staging and matrix curtains. Using multiples, you can

create amazing aerial 3D and matrix effects. This product can be used

indoor and outdoor.

Speciﬁcations: Light source: 0.72W SMD 5050 RGB LEDs x 4 n Long

life LED light source: Average 50,000 hours n Low power consumption

(0.72W per sphere) and no heat n No ﬂicker, constant current driven

LEDs n RGB color mixing with independent control of each pixel n RGB

color mixing with independent control of each pixel (set of 2 LEDs) n View

angle: 360 degrees n DMX In/Out: using special cables/connectors (sold

separately) n Manually addressable using black box settings tool n Insu-

lation Rating: IP65 n Power input: 15vDC n Operating temperature rating:

-20°C to 60°C n Size: 50 MM in diameter n Weight: 0.25 kgs / 0.55 lbs n

Color: Opaque white or clear acrylic

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Dynamix DW - 04/S Spezifikationen Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gateways / Controller Dynamix DW - 04/S