FXS H.323 VoIP Gateway User Manual
Step 1. Click the [Start] button, Choose [Settings], then [Control Panel]. Double-click the
[Network] icon. Your Network window should appear as follows.
Step 2. Select the [Configuration] tab.
Import:
For Windows 2000 & Windows XP Setting, you will find that they differs with Windows
98/ME/NT slightly. See the Following for reference.
Click the “Local Area Connection” icon on the lower right hand side of your desktop
screen.
In the [Local Area Connection Status] windows, click the [Properties] button the your
Network windows will appear.
There is only one tab, [General], in the Network window.
Step 3. Click whether the TCP/IP Protocol has already been installed onto your computer’s
Ethernet card. Note that TCP/IP Protocol an be installed for a computer’s Dial-Up Adapter
as well as for the Ethernet cad.
- If yes, go to set 7.
- If no, click the [Add] button
Step 4. Double-click [Protocol] in the Select Network Component Type or highlight [Protocol]
then click [Add].
Step 5. Highlight [Microsoft] under the list of manufactures
Step 6. After a new second, you will be returned to the Network window. The TCP/IP Protocol
should now be on the list of installed network components.
Step 7. Click the [Properties] button. The TCP/IP Properties windows consist of several tabs.
Choose the [IP Address] tab.
Step 8. Select [Specify an IP Address] and enter [10.1.1.1] in the [IP Address] location (where
xxx is a number between 2 and 254 used by the VoIP Gateway to identify each computer),
and the default [Subnet Mask: 255.0.0.0]. Note than no two computers on the same LAN
can have the same IP address.
Step 9. Click on the [DNS Configuration] tab and select [Enable DNS]. Then click the [Add]
button.
Step 10. Click on the [Gateway] tab and enter the High-Performance VoIP Gateway default
gateway value 10.1.1.254 in the [new gateway] field, then click [Add] Button.
Step 11. Click [OK] button, Restart your PC to complete the TCP/IP installation.
1.9
Power
Up
Yo ur
VoIP
Gateway
At this point, you should have connected the console port, the LAN Port, the WAN port and
the power port to the appropriate devices or lines. Plug the power adapter into a wall outlet. The
Power LED should be on. The Status LED will come on after the system tests are complete. The
WAN LED and one of the LAN LEDs come on immediately after the Status LED come on, if
connections have been made to the LAN and WAN ports.
-
10
-
(122 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern