Dynamix DW-02 Bedienungsanleitung PDF herunterladen (Seite 89)

FXS H.323 VoIP Gateway User Manual

24.4.3 Hotline Mode

The Hotline Mode is applied in limited two peers. User just picks up the phone set and then

hears ring back tone or dial tone depended on configurations of destination device.

Gatekeeper Mode

Step 1. Set gateway under Gatekeeper mode.

Step 2. Create a Hotline table with [line] command.

Usr/config$ line –config 1 hotline 1001

In this example means: if user picks up phone set of FXS Line1, gateway will automatically

dial out [1001].

Step 3. Ather the configuration [commit] and [reboot] the device.

Usr/config$ commit

usr/config$ reboot

P2P Mode Usage:

Step 1. Set gateway under P2P mode.

Step 2. Create phone book table with [pbook] command.

Step 3. Create a Hotline table with [line] command.

usr/config$ h323 –mode 1

usr/config$ pbook –add name test ip 10.1.1.1 e164 1001

usr/config$ line –config 1 hotline 1001

In this example means: if user picks up phone set of FXS Line1, gateway will automatically

dial out IP address of [1001].

Step 4. Ather the configuration [commit] and [reboot] the device.

usr/config$ commit

usr/config$ reboot

24.4.4 Forward Mode

Set no answer forward table provides No Answer Forward function. For call forward

function, it can works under GK or P2P mode.

GK Mode Usage:

Step 1. Setting Line1 busy forward Line2

usr/config$ line –config 1 forward 1002

In this example means: if user calls in FXS Line and hasn’t been answered in forward time

(please refer to [sysconf -forwardtime] command), gateway will automatically forward this call

to phone number [1002].

Step 2. Ather the configuration [commit] and [reboot] the device.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 135 136

Keine Kommentare

Dynamix DW-02 Bedienungsanleitung Seite 89