Dynamix DW-02 Bedienungsanleitung Seite 60

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 136
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 59
FXS H.323 VoIP Gateway User Manual
LABEL DESCRIPTION
Switch prefix function, once user dials out, gateway will automatically add prefix
number before number user dialed.
User defined Prefix
Disable
Disable the defined prefix after press the selected digit (0,1~9, *)
User defined Prefix This will be added in the first digits of the numbers that users had dialed.
Can also define IP address here in P2P mode, once user press “#”, Gateway
will call out this IP address.
Ring Time
(FXS+FXO)
It for the ring detection from the PSTN. The ring detection will be failed if
users configure it too long (FXO Only).
Ring Before Answer
(FXS+FXO)
This will help the users to answer the calls from PSTN into this gateway
quickly. The call will be connected by one time ring if users configure this
for 1. From 1 to 10 (FXO Only).
Codec Select Method This could support that the codec will follow the MSD (Master Slave
Determination) or the caller side. Master: Follow the result from the
Master Slave Determination. Caller: Follow the caller side.
Local Generate Ring
Back Tone
To enable or disable the ring back tone generation from the local side.
End of Dial To enable or disable the end of dial function. This function key will be the
digit “#”.
Gateway Prefix To keep or drop the prefix number of this gateway. This only support the
Gateway type in the GK routed mode.
FXO Type
(FXS+FXO)
Users could configure the entire calls need the 2nd stage dialing or not.
Normal: The 1st or 2nd stage dialing will depend on the dialing plan from
the users. If user dial the number of the FXO port, that will be the 2nd stage
dialing. Force 2nd dial: Every call will need the 2nd stage dialing type
(FXO Only).
Hardware Type
(FXS+FXO)
Set the hardware detection type, select auto detect/ 1FXS+1FXO/
2FXS+2FXO mode (FXO Only).
OK [button] Click [OK] button to save your changes back to the VoIP Gateway volatile
memory.
Note:
The default value is to auto detect hardware type. Usually it is not necessary to change this setting.
Please make sure about your Hardware Type, Gateway may be not functional if set
wrong hardware type.
-
52
-
Seitenansicht 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 135 136

Kommentare zu diesen Handbüchern

Keine Kommentare