Dynamix DW-02 Bedienungsanleitung PDF herunterladen (Seite 31)

FXS H.323 VoIP Gateway User Manual

Step 1. The WAN IP Address obtained from ADSL has two kinds of methods.

Step 2. One is fixed IP Address, while user applies for one or more fixed IP Addresses.

Step 3. Another is dynamic IP Address while user applies for dial-up connection way. The

LAN IP Address of User’s PC can be set as DHCP client in order to gain a valid one.

Step 4. Another IP Address for Gateway must be set as an fixed one in order for that IP

Sharing device pass forwarding the relevant information from WAN to LAN. Besides, a

valid IP Address meets the IP Sharing device (LAN site) is the element.

Step 5. VoIP Gateway must enable the IP Sharing function for the fixed/dynamic WAN IP

Address.

Note:

With Dynamic WAN IP Address, a valid Gatekeeper for VoIP Gateway to get register

on is a must. In other word, it is not workable in Peer-to-Peer mode while dynamic WAN IP

Address.

Step 6. IP Sharing device must have a function to do IP/Port mapping. Some is named as DMZ,

some is named as virtual server whatever. The VoIP messages from WAN have to

completely pass forward to the LAN. It is said if the VoIP Gateway is assigned a virtual

fixed IP Address such as 192.168.1.5, IP Sharing device must forward the VoIP message to

192.168.1.5.

Step 7. Configuration the VoIP Gateway IP address for IP Sharing Mode. Click [Network

Interface] on the navigation panel. In the Network Interface screen, enter the IP address,

Subnet mask and the default gateway in the network table. Please follow up your IP Sharing

device

Step 8. Enable the IP sharing function and put the static IP address in the IP Sharing server

address (e.g. 210.59.163.198) and click the OK button.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 135 136

Keine Kommentare

Dynamix DW-02 Bedienungsanleitung Seite 31